01 · Flagship
Stormwater Management & SuDS
Geo-cellular soakaway, attenuation, passive irrigation, and root-space systems. The Kingdom's largest SuDS project was delivered by NGS.
View division →
Nasra GeoSyn · Riyadh · Saudi Arabia
Engineering the unseen
Engineering the unseen
foundations of a sustainable Kingdom.
Nasra GeoSyn (NGS) is Saudi Arabia's sustainable civil and environmental engineering arm — supplying the geosynthetics, stormwater (SuDS), waterproofing, and ground-stabilization systems that hold the Kingdom's infrastructure in place. Our work is rarely seen, because it sits beneath what people use every day. That is exactly the point.
ISO 9001 · Quality
ISO 14001 · Environment
ISO 45001 · Safety
UN Global Compact · Participant
337+
Worldwide Projects
250,000+
m³ of SuDS Engineered in KSA
47+
Saudi Proj.
Approvals
Approvals
9+
Certifications
— What we do
What you see above. What we engineer beneath.
Above the line: the buildings, parks, and roads people see. Below it: the geotextiles, drainage cells, and geocellular tanks that move water, hold ground, and keep all of it standing. The diagram shows both — NGS engineers everything beneath the line.
Our Solutions
Six engineering divisions.
NGS designs, supplies, and supports installation across six engineering disciplines — each built for the demands of Saudi Arabia's climate, ground conditions, and Vision 2030 infrastructure.
02 · Materials
Geosynthetics
Geotextile, geogrid, GCL, geofoam, geocomposite, drainage cell, geocell, erosion control, silt curtain, geobag, geotube, and panel drain systems.
View division →
03 · Protection
Waterproofing
Pre-applied, post-applied, FPO and HDPE, EPDM, TPO, and PVC membrane systems for below-grade, podium, tunnel, and reservoir applications.
View division →
04 · Structure
Bridges & Tunnels
Elastomeric bearings, expansion joints, butyl seal systems, post-tensioning, tunnel waterproofing, and NFPA and Dutch RWS-rated fire protection.
View division →
05 · Earth Retention
MSE & Gabion Walls
Mechanically Stabilized Earth wall systems, Gabion box systems, and plantable soil retention. From highway retention to architectural walls.
View division →
06 · Engineering
Engineering & BIM Services
Hydraulic design, geotechnical engineering, BIM modeling, technical advisory, value engineering, and installation supervision and training.
View division →
On-Site Engineering
We don't disappear when the materials arrive.
Geosynthetics succeed or fail at the point of installation. That's why NGS engineers stay on the ground with the contractor — handling installation supervision, on-site training, and quality control throughout the works.
It's how we delivered the largest SuDS project in the Kingdom — and it's how we approach every project that follows.
On-sitesupervision during installation
Hands-ontraining for contractor crews
QA / QCthroughout the works
Local teamRiyadh-based, fast mobilization
Sustainability at the Core
Aligned with the United Nations Global Compact. Engineered for the long horizon.
As a participant of the UN Global Compact, NGS commits to the ten principles covering human rights, labour, environment, and anti-corruption — and translates them into the engineering of every product we supply.
10
UN Global Compact Principles
Human rights, labour, environment, and anti-corruption — embedded into how we operate, source, and deliver across every project.
50+ yr
Design Life
Each NGS system is engineered for a minimum 50-year service life under typical Saudi buried conditions — the longer it lasts, the lower its lifecycle impact.
↓
Lower Embodied Carbon
Geosynthetic systems carry significantly lower embodied carbon than conventional mineral-based alternatives, and their long service life reduces lifecycle impact further.
Certifications & Approvals
Documented. Audited. Verified.
NGS holds the certifications and supplier approvals required to deliver on Saudi Arabia's most demanding projects.
Quality Management
ISO 9001:2015
Certified under United Accreditation Foundation. Audited annually with full management system documentation maintained.
UAF Accredited
View certificate →
Environmental Management
ISO 14001:2015
Environmental management system certified — covering material sourcing, site operations, waste, and lifecycle responsibility.
UAF Accredited
View certificate →
UN Global Compact
Participant
Active participant of the United Nations Global Compact — committed to the ten principles on human rights, labour, environment, and anti-corruption.
UN GC Participant
View statement →
Health & Safety
ISO 45001:2018
Occupational health and safety management system. Field operations, installation supervision, and office safety all covered.
UAF Accredited
View certificate →
Tier-1 PMC Approvals
Pre-Approved Supplier
Supplier approvals held with Bechtel, Parsons, Jacobs, AECOM, AtkinsRéalis, WSP, and the major PMCs delivering Saudi Vision 2030.
8+ Tier-1 PMCs
Why NGS
Engineering depth. Saudi specificity. Quiet excellence.
- 01
Engineered for Saudi conditions
Every system is specified for the Kingdom's specific ground, temperature, salinity, and rainfall characteristics — not imported one-size-fits-all solutions.
- 02
Triple ISO certified
ISO 9001:2015 Quality, ISO 14001:2015 Environment, ISO 45001:2018 Health & Safety — accredited under United Accreditation Foundation.
- 03
Pre-approved with tier-1 PMCs
Approved supplier across Bechtel, Parsons, Jacobs, AECOM, AtkinsRéalis, Worley JESA, WSP, and Faithful+Gould project teams.
- 04
On-site engineering presence
Installation supervision, hands-on training, and QA/QC support throughout the works — we don't disappear when the materials arrive.
- 05
Local stock, local team
Riyadh-based operations with dedicated technical, sales, and project teams responding on Saudi project timescales.
- 06
Sustainability engineered in
UN Global Compact participant. Every solution selected for 50-year design life, recyclable materials, and measurable carbon reduction.
FAQ
Frequently asked questions
What does Nasra GeoSyn (NGS) do?
Nasra GeoSyn (NGS) is the engineering arm of the Nasra Group, a Saudi company supplying Sustainable Urban Drainage Systems (SuDS), geosynthetics, waterproofing, MSE walls, bridge and tunnel systems, and BIM engineering for Vision 2030 infrastructure.
Where is NGS based and where does it operate?
NGS is based in Riyadh, Saudi Arabia, and serves projects across the Kingdom including NEOM, ROSHN, Diriyah, Qiddiya, King Salman Park, AlUla, and Red Sea Global.
Is NGS certified?
Yes. NGS holds ISO 9001 (Quality), ISO 14001 (Environment), and ISO 45001 (Occupational Health & Safety) management-system certifications under UAF accreditation, and is a participant in the UN Global Compact.
What makes NGS different from a standard materials supplier?
NGS engineers outcomes, not just products — providing product-performance calculations, value engineering, on-site installation supervision, and long-term operation and maintenance guidance, with a minimum 50-year design life under Saudi ground conditions.
Begin a Conversation
Tell us what you're building.
Share the project, the site, and the design constraints. Our engineering team will respond within one business day — with the right specification and a clear next step.